How to create your own wall panels in just 3 steps

If you want to create the perfect wall panels for your home, you’re in luck.

Here’s how to do it. 1.

Choose the materials You can buy wall panels online or get them locally from Ikea, Home Depot, Home Goods or a Home Builders supply store.

If you need help choosing a suitable material, see our guide to buying wall panels.


Design your own design Your design is important to your home.

We’ll show you how to create wall panels from scratch.

For more advice on wall panels, see How to choose a wall panel from Ikeo.


Measure and cut Your wall panels will be a great addition to your living space.

To cut them, use a jigsaw or an old-fashioned saw.

Use the right tools for the job.

You can also use scissors or a millstone.

For the best results, make sure you use a drill press.


Cut to size Your wall panel will be 3 to 5 centimetres wide, and will fit on any flat surface.

This will ensure that you can cut them quickly and easily.

If your panels are too large, it may be easier to cut them into shapes to fit a specific size.


Build the panel First, cut out your design.

If the design has two columns, the top and bottom will be on the opposite sides of the wall.

This is to make it easier to place the panel on a flat surface and it’s also to avoid gaps between the panels.

Make sure your design has a straight line running through the centre.

Cut the panel in the right direction, so it forms the outline of your wall.

For your panels, make a circle with your pencil or a ruler.

Draw lines across the bottom of the panel to form a line.

Place your panel on the floor.

Now, make the shape of the floor as you cut out the design.

Make a template from wood or scrap paper, then cut the panels to the shape.

5:30am: Check your work 5:45am: Add your design You will need to remove the panels from the wall, but the process is simple.

First, you will need a small saw or a drill.

Cut a hole in the panel, and then cut a piece of wood or cardboard to make the bottom.

Then, attach the bottom to the template and measure the width of the piece of cardboard or wood.

If it’s wider than the panel’s width, you need to cut a wider piece of panel to make a wider hole.

To ensure your panels fit correctly, you can use a mill or a rotary tool to make an exact measurement.

Cut out the template with the template.

For a more detailed tutorial, see the How to make your own template article.

You should be able to cut your panel to the exact width, and not leave any gaps.

6:00am: Clean up the panels You can start by cleaning the panels with soap and water, then dry them.

Make an outline with your hand, and use your rotary cutter to cut out a circle from the template, leaving a gap between the panel and the wall above.

Next, you should make a cut across the top of the template to fill the gap.

Using your hand or a scalpel, cut a circle of your design out of the bottom, and make a gap at the top.

For this step, it’s better to make this cut with a mill and not a rotar tool.

Using a rotational tool, cut the template as you did before, but now cut across with a drill and a scalper.

To finish, the template is ready to hang.

You will see a large gap between panels that you will fill with glue.

This process can take up to 30 minutes.

Once the glue dries, carefully place your panel onto the floor and repeat this process with the other panels.

You may also need to trim a few of the edges of the panels, and clean them with a damp cloth.

7:00pm: Check out your finished wall panel How long will it take to finish your wall panels?

The final product is almost finished!

Make sure to measure the length of your panel, so you know exactly how much material it will need.

This helps you decide how much to add to the wall panel, or what size it should be.

Make your choice and put it in your house, to make sure it’s finished.

Related Post